ISC Industrial Sales Company

Tilt Switches

                                                        

 Tilt Switches and Control Units

For Sensing and Controlling Levels with A Wide Variety of Solids and Liquids

  • Rugged, abrasion-resistant tilt switch.
  • Simple Installation.
  • Control Unit has solid state, printed circuit board construction.
  • Adjustable time delay to 10 seconds -- Prevents false trips.
  • Standard Enclosure:
             Model 20-43-NEMA-4X
             Model 21-38-Class II
             Others available.

- Performance proven in thousands of applications throughout the world.

- All probes include mounting software.

 

Ramsey Tilt Switch #20-39-25 (also known as 20-39)

Contact Rating: 1 Amp at 24VDC, Non-inductive. Rated for use in applications between -25°F to 180°F. Finish: Nickle Chrome.

Ramsey Tilt Switch #20-39-50

 Contact Rating: 1 Amp at 24VDC, Non-inductive. Rated for use in applications between -25°F to 180°F. Finish: Nickle Chrome.

 

Ramsey Tilt Switch #20-30-SS-25 (also known as 20-30)

Contact Rating: 1 Amp at 24VDC, Non-inductive. Rated for use in applications between -25°F to 180°F. Finish: 304 Stainless Steel
 

    

Ramsey Tilt Switch #20-41-SS-25

Contact Rating: 4 Amp at 110VAC, Non-inductive. Rated for use in applications between -25°F to 180°F. Finish: 304SS.

 


Ramsey Tilt Switch #20-41-25 (also known as 20-41)

 Contact Rating: 4 Amps at 120VAC, Non-inductive. Rated for use in applications between -25°F to 180°F. Finish: Nickle Chrome.

                         

 

  Ramsey 6" Stainless Steel Float Ball

Float Ball Accessory for Stainless Steel Tilt Switch Probes

           

            

Ramsey #20-38-4 Control

Metal NEMA 4 Metal enclosure. DPDT Contacts. Contact Rating: 10 Amps at 115VAC, Non-inductive. Time Delay: 0-10 Seconds Adjustable. Selection of vertical or tilted probe position for "normal" condition. Power requirement: 110 VAC, 50/60 HZ ± 10%. 220 Volt Versions available







             

Ramsey #20-43 Control

Plastic NEMA 4X enclosure. DPDT Contacts Contact Rating: 10 Amps at 115VAC, Non-inductive Time Delay: 0-10 Seconds. Adjustable Selection of vertical or tilted probe position for "normal" condition. Power requirement: 110 VAC, 50/60 HZ ± 10% 220 Volt versions available



 
Website Builder