ISC Industrial Sales Company

Conveyor Safety



                                                             


Safety Cable Pull Switch (S.P.S) 
    For Emergency or Normal Shut-off

-Universal design for bi-directional activation allows one unit to be used for end or middle locations.
-Universal mounting design allows either top or side mounting the switch to the conveyor stringers.
-Rugged cast aluminum enclosure with standard NEMA-4 clear iridite finish or optional two part bakes urethane enamel finish for salt, alkaline, or acidic atmospheres. Also, electro-less nickel is an optional finish for extremely corrosive environments.
-Full cover plate permits easy access to terminals and switches without deactivating or disassembling of switch.
-Compact design for tight fit areas.
-Highly visible black arm against silver or yellow background easily shows condition of the switch being alarm or normal.
-Compete accessories available including cable, standoff eyes, and cable clamps.
-Stocked by local distributors for immediate delivery.
-Manual reset lever.
- Available with CSA approval for Class II models available along with barriers for Class I areas.
-Optional red flags available for notification of alarm.

Belt Misalignment Switch
    For Protection of Belt Conveyors and Personnel

-Universal Mounting design for top or bottom of conveyor stringers.
-Rugged cast aluminum enclosure with standard NEMA-4 clear iridite finish or optional two part baked urethane enamel finish for salty, alkaline or acidic atmospheres. Also, electroless nickel optional finish for extremely corrosive environments.
-Full cover plate permits easy access to terminals, switches and adjustments
-Cover plate can be removed without detaching roller.
-Stocked by local distributors for immediate delivery
-Roller bearings of actuator roller are rated 5000 R.P.M for belt speeds to 1250 F.P.M
-Normal angle of actuator roller adjustable by 22.5° increments for angling towards the troughed belt and away from covers and structure.
-Standard unit includes alarm contacts at 10° from normal and shut down at 20°
-Available with CSA approval for Class II models available along with barriers for Class I areas
-Optional red flags available for notification of alarm.
 

Ramsey ROS-2D Run-Off Switch

NEMA 4 Enclosure. Actuator arm adjustments: 22.5 degree increments from vertical. Contacts: (2) SPDT switches. Contact rating: 10 Amps, 480 V.


Ramsey SPS-2D

NEMA 4 Enclosure. Bi-Directional activation. Contacts: (2) SPDT switches. Contact rating: 10 Amps, 480 V. Pull force rating: 3.63 kg (8 lb) 

 


Ramsey TPS-2D Tripper Position Switch

Applications: Position Sensing of Heavy Moving Equipment Very Heavy Duty Manual On/Off Switch NEMA 4 Enclosure Contacts: (2) SPDT switches Contact rating: 10 Amps, 480 V

 
Ramsey ROS-2D-3 Run-Off Switch

NEMA 4 Enclosure. FM approved, Class 2, Hazardous Areas. Actuator arm adjustments: 22.5 degree increments from vertical. Contacts: (2) SPDT switches. Contact rating: 10 Amps, 480 V.


Ramsey SPS-2D-3 Pull Switch


 NEMA 4 Enclosure. CSA Approved, Class 2, Hazardous Area Bi-Directional activation. Contacts: (2) SPDT switches. Contact rating: 10 Amps, 480 V. Pull force rating: 3.63 kg (8 lb) 

 
Website Builder